Sterkir bræðilímsstautar
- Tækniupplýsingar
- Ítarupplýsingar
- Good thermostability
- Short processing and setting times
- Waterproof and resistant to UV and ageing
Heat occurring during storage (e.g. due to solar radiation) must be avoided due to the changes to the outer shape of the hot melt adhesive this can cause.
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
- Colour Yellow
- Chemical basis Compound of polymer and natural resin
- Density/conditions 0,93 g/cm³ / at 20°C
- Min./max. processing temperature 180 to 220 °C
- Silicone-free Yes
- Length 200 mm
- Weight of content 500 g
- Diameter 11.5 mm
- Number of pieces 25 PCS
- Shelf life from production 24 Month
- Viscosity 3.24 Pas
- Min./max. open time 15-40 s
- Solvent-free Yes
Vörunafn | M. í kassa | |
---|---|---|
Bræðilímsstautar 102 0,5kg sterkir 0890 100 057 | 1x | |
Bræðilímsstautar 102 0,5kg sterkirVörunúmer: 0890 100 057Tæknilegar upplýsingar
|