Vinklar

Vörunúmer: 0681 050 160

Fylgiskjal 1

Tækniupplýsingar
Ítarupplýsingar

Solid 3 mm angle connector for timber structures. For high-quality connections in load-bearing wood/wood or wood/concrete structures.

Low offset between the wooden construction and concrete anchoring

Slim construction for low application

Plates hot-dip galvanised on both sides (DX51D + Z275 (approx. 20 µm)) of thickness 3.0 in accordance with EN 10327:2004

Application in use class 1 and 2 according to EN 1995:2013

For higher requirements, the use of reinforced angle connectors or tension anchors is recommended

Notice

The diameter of bolts/screws/anchors may only be max. 2 mm smaller than the diameter of the hole.

The respective basic conditions of the applicable anchor approval must be observed.

Available work documents:

Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.

Proof of Performance

European technical approval ETA-09/216

Material Steel
Surface Galvanised
Version Without bar
Product weight (per item) 166.198 g
Approval ETA-09/0216
Thickness 3 mm
Weight 162 g
Width x height x depth 40 x 160 x 42 mm
Number of D 13 mm holes in subcarrier nJ/main carrier nH 2 + 1 PCS
Number of D 5 mm holes in subcarrier nJ + main carrier nH 12 + 4 PCS
Material designation DX51D
Material standard DIN EN 10327:2004

Innskrá til að sjá verð

Vörunafn	Width x height x depth	M. í kassa
Vinkill 50x50x35 0681 050 040	35 x 50 x 50 mm	150x
Vinkill 50x50x35 Vörunúmer: 0681 050 040 Tæknilegar upplýsingar Material Steel Surface Galvanised Version Without bar Product weight (per item) 57.713 g Approval ETA-09/0216 Thickness 2.5 mm Weight 57 g Width x height x depth 35 x 50 x 50 mm Number of D 5 mm holes in subcarrier nJ + main carrier nH 4 + 4 PCS Material designation DX51D Sjá allar upplýsingar
Vinkilfesting 40x40x160x3,0mm b1 0681 050 160	40 x 160 x 42 mm	50x
Vinkilfesting 40x40x160x3,0mm b1 Vörunúmer: 0681 050 160 Tæknilegar upplýsingar Material Steel Surface Galvanised Version Without bar Product weight (per item) 166.198 g Approval ETA-09/0216 Thickness 3 mm Weight 162 g Width x height x depth 40 x 160 x 42 mm Number of D 13 mm holes in subcarrier nJ/main carrier nH 2 + 1 PCS Number of D 5 mm holes in subcarrier nJ + main carrier nH 12 + 4 PCS Sjá allar upplýsingar
Vinkill 70x70x55 0681 070 055	55 x 70 x 70 mm	50x
Vinkill 70x70x55 Vörunúmer: 0681 070 055 Tæknilegar upplýsingar Material Steel Surface Galvanised Version Without bar Product weight (per item) 129.26 g Approval ETA-09/0214 Thickness 2.5 mm Weight 129 g Width x height x depth 55 x 70 x 70 mm Number of D 13 mm holes in subcarrier nJ/main carrier nH 1 + 1 PCS Number of D 5 mm holes in subcarrier nJ + main carrier nH 9 + 9 PCS Sjá allar upplýsingar
Vinkill m.styrkingu 105x105x90 0681 100 990	90 x 105 x 105 mm	25x
Vinkill m.styrkingu 105x105x90 Vörunúmer: 0681 100 990 Tæknilegar upplýsingar Material Steel Surface Galvanised Version With bar Product weight (per item) 387.600 g Approval ETA-09/0214 Thickness 3 mm Weight 391 g Width x height x depth 90 x 105 x 105 mm Number of D 13 mm holes in subcarrier nJ/main carrier nH 1 + 3 PCS Number of D 5 mm holes in subcarrier nJ + main carrier nH 14 + 10 PCS Sjá allar upplýsingar
Vinkill 70x70x55x2,5mm 5390 200 070	55 x 70 x 70 mm	50x
Vinkill 70x70x55x2,5mm Vörunúmer: 5390 200 070 Tæknilegar upplýsingar Material Aluzinc structural steel, 1.0242 Surface Hot dip galvanized Product weight (per item) 127.540 g Approval ETA-08/0183 Thickness 2.5 mm Width x height x depth 55 x 70 x 70 mm Number of D 5 mm holes in subcarrier nJ + main carrier nH 10 + 10 PCS Material designation S250GD Number of D 11 mm holes in main carrier nH 1 PCS Number of D 11 mm holes in subcarrier nJ + main carrier nH 1 + 1 PCS Sjá allar upplýsingar
Vinkill 90x90x65x2,5mm 5390 200 090	65 x 90 x 90 mm	50x
Vinkill 90x90x65x2,5mm Vörunúmer: 5390 200 090 Tæknilegar upplýsingar Material Aluzinc structural steel, 1.0242 Surface Hot dip galvanized Product weight (per item) 196.080 g Approval ETA-08/0183 Thickness 2.5 mm Width x height x depth 65 x 90 x 90 mm Number of D 13 mm holes in subcarrier nJ/main carrier nH 2 + 3 PCS Number of D 5 mm holes in subcarrier nJ + main carrier nH 9 + 6 PCS Material designation S250GD Number of D 11 mm holes in main carrier nH 1 PCS Sjá allar upplýsingar
Vinkill 105x105x90x3,0mm 5390 200 105	90 x 105 x 105 mm	25x
Vinkill 105x105x90x3,0mm Vörunúmer: 5390 200 105 Tæknilegar upplýsingar Material Aluzinc structural steel, 1.0242 Surface Hot dip galvanized Product weight (per item) 393.500 g Approval ETA-08/0183 Thickness 3 mm Width x height x depth 90 x 105 x 105 mm Number of D 13 mm holes in subcarrier nJ/main carrier nH 2 + 3 PCS Number of D 5 mm holes in subcarrier nJ + main carrier nH 15 + 14 PCS Material designation S250GD Number of D 11 mm holes in main carrier nH Sjá allar upplýsingar