Hnoð ál/stál

Fylgiskjal 1

Tækniupplýsingar
Ítarupplýsingar

Sleeve: Al-Mg aluminium 2.5. Mandrel: Galvanised steel, blue passivated (A2K)

High-quality rivet connection

Clean, secure closing

Reliable, patented riveting mandrel locking mechanism

Consistently high tensile strength and shearing resistance

High-strength rivet connections; impact-resistant and impermeable to spray water

Rivet sleeve does not snap off when subjected to a low nominal clamping range

Nominal diameter (d1) 5 mm
Length (l1) 35 mm
Head diameter (dk) 9.6 mm
Head height (k1) 1.6 mm
Drill hole diameter 5.1 mm
Min./max. grip range 25,0-30,0 mm
Material of the sleeve Aluminium, AlMg 2.5
Material of the mandrel Steel
Surface of the sleeve Plain
Surface of the mandrel Galvanised
Shear-fracture load 2100 N
Tensile fracture load 2800 N

Innskrá til að sjá verð

Vörunafn	Material of the sleeve	Material of the mandrel	Nominal diameter (d1)	Length (l1)	M. í kassa
Hnoð ál/stál 3x16mm (9,0-13,0) 0936 3 16	Aluminium, AlMg 2.5	Steel	3 mm	16 mm	500x
Hnoð ál/stál 3x16mm (9,0-13,0) Vörunúmer: 0936 3 16 Tæknilegar upplýsingar Nominal diameter (d1) 3 mm Length (l1) 16 mm Head diameter (dk) 6.4 mm Head height (k1) 1.1 mm Drill hole diameter 3.1 mm Min./max. grip range 9,0-13,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 3x6 (1,5-3,5) 0936 3 6	Aluminium, AlMg 2.5	Steel	3 mm	6 mm	1x
Hnoð ál/stál 3x6 (1,5-3,5) Vörunúmer: 0936 3 6 Tæknilegar upplýsingar Nominal diameter (d1) 3 mm Length (l1) 6 mm Head diameter (dk) 6.4 mm Head height (k1) 1.1 mm Drill hole diameter 3.1 mm Min./max. grip range 1,5-3,5 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 3,0x8mm (3,5-5,5) 0936 3 8	Aluminium, AlMg 2.5	Steel	3 mm	8 mm	500x
Hnoð ál/stál 3,0x8mm (3,5-5,5) Vörunúmer: 0936 3 8 Tæknilegar upplýsingar Nominal diameter (d1) 3 mm Length (l1) 8 mm Head diameter (dk) 6.4 mm Head height (k1) 1.1 mm Drill hole diameter 3.1 mm Min./max. grip range 3,5-5,5 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 3,2x10mm (5,5-7,5) 0936 32 10	Aluminium, AlMg 2.5	Steel	3.2 mm	10 mm	500x
Hnoð ál/stál 3,2x10mm (5,5-7,5) Vörunúmer: 0936 32 10 Tæknilegar upplýsingar Nominal diameter (d1) 3.2 mm Length (l1) 10 mm Head diameter (dk) 6.4 mm Head height (k1) 1.1 mm Drill hole diameter 3.3 mm Min./max. grip range 5,5-7,5 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 3,2x6mm (0,5-3,5) 0936 32 6	Aluminium, AlMg 2.5	Steel	3.2 mm	6 mm	500x
Hnoð ál/stál 3,2x6mm (0,5-3,5) Vörunúmer: 0936 32 6 Tæknilegar upplýsingar Nominal diameter (d1) 3.2 mm Length (l1) 6 mm Head diameter (dk) 6.4 mm Head height (k1) 1.1 mm Drill hole diameter 3.3 mm Min./max. grip range 0,5-3,5 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 3,2x8mm (3,5-5,5) 0936 32 8	Aluminium, AlMg 2.5	Steel	3.2 mm	8 mm	500x
Hnoð ál/stál 3,2x8mm (3,5-5,5) Vörunúmer: 0936 32 8 Tæknilegar upplýsingar Nominal diameter (d1) 3.2 mm Length (l1) 8 mm Head diameter (dk) 6.4 mm Head height (k1) 1.1 mm Drill hole diameter 3.3 mm Min./max. grip range 0,5-5,5 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 4x10mm (5,0-6,5) 0936 4 10	Aluminium, AlMg 2.5	Steel	4 mm	10 mm	500x
Hnoð ál/stál 4x10mm (5,0-6,5) Vörunúmer: 0936 4 10 Tæknilegar upplýsingar Nominal diameter (d1) 4 mm Length (l1) 10 mm Head diameter (dk) 8 mm Head height (k1) 1.4 mm Drill hole diameter 4.1 mm Min./max. grip range 5,0-6,5 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 4x12mm (6,5-8,5) 0936 4 12	Aluminium, AlMg 2.5	Steel	4 mm	12 mm	500x
Hnoð ál/stál 4x12mm (6,5-8,5) Vörunúmer: 0936 4 12 Tæknilegar upplýsingar Nominal diameter (d1) 4 mm Length (l1) 12 mm Head diameter (dk) 8 mm Head height (k1) 1.4 mm Drill hole diameter 4.1 mm Min./max. grip range 6,5-8,5 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 4x16mm (8,5-12,5) 0936 4 16	Aluminium, AlMg 2.5	Steel	4 mm	16 mm	500x
Hnoð ál/stál 4x16mm (8,5-12,5) Vörunúmer: 0936 4 16 Tæknilegar upplýsingar Nominal diameter (d1) 4 mm Length (l1) 16 mm Head diameter (dk) 8 mm Head height (k1) 1.4 mm Drill hole diameter 4.1 mm Min./max. grip range 8,5-12,5 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 4x8mm (3,0-5,0) 0936 4 8	Aluminium, AlMg 2.5	Steel	4 mm	8 mm	500x
Hnoð ál/stál 4x8mm (3,0-5,0) Vörunúmer: 0936 4 8 Tæknilegar upplýsingar Nominal diameter (d1) 4 mm Length (l1) 8 mm Head diameter (dk) 8 mm Head height (k1) 1.4 mm Drill hole diameter 4.1 mm Min./max. grip range 3,0-5,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 4,8x10mm (4,5-6,0) 0936 48 10	Aluminium, AlMg 2.5	Steel	4.8 mm	10 mm	500x
Hnoð ál/stál 4,8x10mm (4,5-6,0) Vörunúmer: 0936 48 10 Tæknilegar upplýsingar Nominal diameter (d1) 4.8 mm Length (l1) 10 mm Head diameter (dk) 9.6 mm Head height (k1) 1.6 mm Drill hole diameter 4.9 mm Min./max. grip range 4,5-6,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 4,8x16mm (6,0-12,0) 0936 48 16	Aluminium, AlMg 2.5	Steel	4.8 mm	16 mm	500x
Hnoð ál/stál 4,8x16mm (6,0-12,0) Vörunúmer: 0936 48 16 Tæknilegar upplýsingar Nominal diameter (d1) 4.8 mm Length (l1) 16 mm Head diameter (dk) 9.6 mm Head height (k1) 1.6 mm Drill hole diameter 4.9 mm Min./max. grip range 6,0-12,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 4,8x8mm (3,0-4,5) 0936 48 8	Aluminium, AlMg 2.5	Steel	4.8 mm	8 mm	500x
Hnoð ál/stál 4,8x8mm (3,0-4,5) Vörunúmer: 0936 48 8 Tæknilegar upplýsingar Nominal diameter (d1) 4.8 mm Length (l1) 8 mm Head diameter (dk) 9.6 mm Head height (k1) 1.6 mm Drill hole diameter 4.9 mm Min./max. grip range 3,0-4,5 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 5x12mm (6,0-8,0) 0936 5 12	Aluminium, AlMg 2.5	Steel	5 mm	12 mm	500x
Hnoð ál/stál 5x12mm (6,0-8,0) Vörunúmer: 0936 5 12 Tæknilegar upplýsingar Nominal diameter (d1) 5 mm Length (l1) 12 mm Head diameter (dk) 9.6 mm Head height (k1) 1.6 mm Drill hole diameter 5.1 mm Min./max. grip range 6,0-8,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 5x16mm (8,0-12,0) 0936 5 16	Aluminium, AlMg 2.5	Steel	5 mm	16 mm	500x
Hnoð ál/stál 5x16mm (8,0-12,0) Vörunúmer: 0936 5 16 Tæknilegar upplýsingar Nominal diameter (d1) 5 mm Length (l1) 16 mm Head diameter (dk) 9.6 mm Head height (k1) 1.6 mm Drill hole diameter 5.1 mm Min./max. grip range 8,0-12,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 5x20mm (12,0-16,0) 0936 5 20	Aluminium, AlMg 2.5	Steel	5 mm	20 mm	250x
Hnoð ál/stál 5x20mm (12,0-16,0) Vörunúmer: 0936 5 20 Tæknilegar upplýsingar Nominal diameter (d1) 5 mm Length (l1) 20 mm Head diameter (dk) 9.6 mm Head height (k1) 1.6 mm Drill hole diameter 5.1 mm Min./max. grip range 12,0-16,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 5x25mm (16,0-21,0) 0936 5 25	Aluminium, AlMg 2.5	Steel	5 mm	25 mm	250x
Hnoð ál/stál 5x25mm (16,0-21,0) Vörunúmer: 0936 5 25 Tæknilegar upplýsingar Nominal diameter (d1) 5 mm Length (l1) 25 mm Head diameter (dk) 9.6 mm Head height (k1) 1.6 mm Drill hole diameter 5.1 mm Min./max. grip range 16,0-21,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 5x30mm (21,0-25,0) 0936 5 30	Aluminium, AlMg 2.5	Steel	5 mm	30 mm	100x
Hnoð ál/stál 5x30mm (21,0-25,0) Vörunúmer: 0936 5 30 Tæknilegar upplýsingar Nominal diameter (d1) 5 mm Length (l1) 30 mm Head diameter (dk) 9.6 mm Head height (k1) 1.6 mm Drill hole diameter 5.1 mm Min./max. grip range 21,0-25,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 5x35mm (25,0-30,0) 0936 5 35	Aluminium, AlMg 2.5	Steel	5 mm	35 mm	100x
Hnoð ál/stál 5x35mm (25,0-30,0) Vörunúmer: 0936 5 35 Tæknilegar upplýsingar Nominal diameter (d1) 5 mm Length (l1) 35 mm Head diameter (dk) 9.6 mm Head height (k1) 1.6 mm Drill hole diameter 5.1 mm Min./max. grip range 25,0-30,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 5x8mm (3,0-4,5) 0936 5 8	Aluminium, AlMg 2.5	Steel	5 mm	8 mm	500x
Hnoð ál/stál 5x8mm (3,0-4,5) Vörunúmer: 0936 5 8 Tæknilegar upplýsingar Nominal diameter (d1) 5 mm Length (l1) 8 mm Head diameter (dk) 9.6 mm Head height (k1) 1.6 mm Drill hole diameter 5.1 mm Min./max. grip range 3,0-4,5 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 6x12mm (6,0-8,0) 0936 6 12	Aluminium, AlMg 2.5	Steel	6 mm	12 mm	250x
Hnoð ál/stál 6x12mm (6,0-8,0) Vörunúmer: 0936 6 12 Tæknilegar upplýsingar Nominal diameter (d1) 6 mm Length (l1) 12 mm Head diameter (dk) 12 mm Head height (k1) 1.9 mm Drill hole diameter 6.1 mm Min./max. grip range 6,0-8,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 6x16mm (8,0-11,0) 0936 6 16	Aluminium, AlMg 2.5	Steel	6 mm	16 mm	250x
Hnoð ál/stál 6x16mm (8,0-11,0) Vörunúmer: 0936 6 16 Tæknilegar upplýsingar Nominal diameter (d1) 6 mm Length (l1) 16 mm Head diameter (dk) 12 mm Head height (k1) 1.9 mm Drill hole diameter 6.1 mm Min./max. grip range 8,0-11,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 6x20mm (11,0-15,0) 0936 6 20	Aluminium, AlMg 2.5	Steel	6 mm	20 mm	250x
Hnoð ál/stál 6x20mm (11,0-15,0) Vörunúmer: 0936 6 20 Tæknilegar upplýsingar Nominal diameter (d1) 6 mm Length (l1) 20 mm Head diameter (dk) 12 mm Head height (k1) 1.9 mm Drill hole diameter 6.1 mm Min./max. grip range 11,0-15,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar
Hnoð ál/stál 6x25mm (15,0-20,0) 0936 6 25	Aluminium, AlMg 2.5	Steel	6 mm	25 mm	250x
Hnoð ál/stál 6x25mm (15,0-20,0) Vörunúmer: 0936 6 25 Tæknilegar upplýsingar Nominal diameter (d1) 6 mm Length (l1) 25 mm Head diameter (dk) 12 mm Head height (k1) 1.9 mm Drill hole diameter 6.1 mm Min./max. grip range 15,0-20,0 mm Material of the sleeve Aluminium, AlMg 2.5 Material of the mandrel Steel Surface of the sleeve Plain Surface of the mandrel Galvanised Sjá allar upplýsingar