Junior Fix loftkíttisbyssa
- Tækniupplýsingar
- Ítarupplýsingar
Easy to work with
Lightweight, compact and ergonomic design
Rotary pressure controller on handle for slow and fast extrusion
Additional fine regulation of the flow speed via trigger.
Optimum movement
Damper on quick-trigger valve
Protection of e.g. air supply components and simple cleaning
Fully enclosed housing
The average consumption for pneumatic application guns is approx. 7.2 litres/minute.
Caution: The maximum working pressure for applying sealants is 6 bar.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
2 Years WÜRTH MASTERPLUS Warranty for wear damage
The current WÜRTH MASTERPLUS warranty conditions must be observed.
3 Years Warranty on manufacturing and material defects
Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
- Suitable for 310 ml cartridge
- Length 238 mm
- Connection thread 1/4 inch
- Flow capacity 7.2 l/min
- Max. working pressure 10 bar
- Weight of machine 0.47 kg
Vörunafn | Suitable for | Length | M. í kassa | |
---|---|---|---|---|
Loftkíttisbyssa juniorfix-310ml 0703 891 310 | 310 ml cartridge | 238 mm | 1x | |
Loftkíttisbyssa juniorfix-310mlVörunúmer: 0703 891 310Tæknilegar upplýsingar
|