HHS 5000
- Tækniupplýsingar
- Ítarupplýsingar
Reliable lubrication
- Penetrates through to where the lubricating oil is required (excellent creep)
- Ideal for non-visible lubrication points
Reliable wear protection
- Contains solid lubricant – PTFE
- Once the grease film has been stripped, lubrication is taken over by PTFE (dry-running properties)
- Lasting anti-slip protective film under high temperature loads
Reliable due to long-term effect
- Provides reliable and lasting protection against corrosion
- Does not oxidise (gum up) up to +200°C, even up to +250°C for short periods
- No carbonisation residue
Safe application
- Highly compatible with most plastics, O-rings and X-rings
- Neutral behaviour on painted surfaces
Resistant to splashed washer, salt water, weak acids and alkalis
Silicone-free, resin-free and acid-free
Temperature application range: -20°C to +200°C
Briefly: +250°C
Colour: transparent
Provides optimum lubrication safety in everyday use.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
- Contents 500 ml
- Colour Transparent
- Container Aerosol can
- Chemical basis Mineral oil
- Min. flashing point 240 °C
- Silicone-free Yes
-
Resistance against
Water
Salt water
Acid
Lye - Min. temperature conditions -20 °C
- Max. temperature conditions 200 °C
- Shelf life from production 24 Month
- Smell/fragrance Characteristic
- Density 0.86 g/cm³
- AOX-free Yes
- Max. short-term temperature resistance 250 °C
- Acid-free Yes
- Resin-free Yes
- Oil basis Synthetic hydrocarbons
-
Material compatibility
Steel
Non-ferrous metals
Stainless steel
FKM - Flashing point conditions in accordance with DIN ISO 3016
Vörunafn | Contents | M. í kassa | |
---|---|---|---|
Smurefni hhs® 5000 - ptfe 0893 106 3 | 500 ml | 12x | |
Smurefni hhs® 5000 - ptfeVörunúmer: 0893 106 3Tæknilegar upplýsingar
|