Límkíttisforhreinsir/hvati
- Tækniupplýsingar
- Ítarupplýsingar
Suitable for aluminium (anodised), steel, high-grade steel (stainless), galvanised steel (hot-dipped or galvanic), 2-component top coat, (PU, epoxy), 2-component water-based primers and paints, cathodic dip painting, primers (EP/2-component), powder coatings, glass fibre-reinforced plastic (unsaturated polyester), laminate gelcoat or SMC, glass fibre-reinforced plastic (unsaturated polyester), laminate layup, ABS, hard PVC, glass (mineral) and glass ceramic. Not suitable for smoothing or removing adhesives/sealants.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
- Contents 400 ml
- Colour Transparent
- Chemical basis 2-propanol, purified water
- Min. flashing point 12 °C
- Weight of content 316 g
- Shelf life from production 24 Month
- Smell/fragrance Alcohol
- Density 0.79 g/cm³
- Min. flash-off time 10 min
- Flash-off time conditions at 23°C and 50% relative humidity
- AOX-free Yes
| Vörunafn | Colour | M. í kassa | |
|---|---|---|---|
| Límkíttis-forhreinsir/-hvati 400ml 0890 100 60 | Transparent | 12x | |
Límkíttis-forhreinsir/-hvati 400mlVörunúmer: 0890 100 60Tæknilegar upplýsingar
|
|||
