Punktsuðubor hsco - Würth á Íslandi ehf.
Mínar síður

Punktsuðuborar HSCO

  • Tækniupplýsingar
  • Ítarupplýsingar
For simple removal of spot welds Special drill bit for removing spot weldsFixed centring tip means that no centre punching is requiredImproved PLUS centring tip also suitable for use on high-strength sheetsThe optimised tip geometry ensures a longer service life than for conventional spot-weld drill bits.Suitable for use in any standard drillRecommended speed:for Ø 6: up to 920 rpmfor Ø 8: up to 700 rpm NoticeTips to increase the service life of the centring tip:Do not use in drills with an impact chuck or spindles.Set the drill to a suitable speed; the speed of compressed-air devices is generally set too high.
  • Length 65 mm
  • Diameter (Ø) 6 mm
  • Chip flute length 28 mm

Vörunafn Diameter (Ø) Length M. í kassa
Punktsuðubor hsco 10mm 0710 001 0 10 mm 88 mm 1x
Alternate Text

Punktsuðubor hsco 10mm

Vörunúmer: 0710 001 0

Tæknilegar upplýsingar

  • Length

    88 mm
  • Diameter (Ø)

    10 mm
  • Drill diameter

    7.5 mm
Punktsuðubor titan 8mm 0710 008 8 8 mm 78 mm 1x
Alternate Text

Punktsuðubor titan 8mm

Vörunúmer: 0710 008 8

Tæknilegar upplýsingar

  • Length

    78 mm
  • Diameter (Ø)

    8 mm
  • Chip flute length

    38 mm
Punktsuðubor hss 6mm b-2000 0710 6 6 mm 65 mm 1x
Alternate Text

Punktsuðubor hss 6mm b-2000

Vörunúmer: 0710 6

Tæknilegar upplýsingar

  • Length

    65 mm
  • Diameter (Ø)

    6 mm
  • Chip flute length

    28 mm
Punktsuðubor hss 8mm b-2000 0710 8 8 mm 78 mm 1x
Alternate Text

Punktsuðubor hss 8mm b-2000

Vörunúmer: 0710 8

Tæknilegar upplýsingar

  • Length

    78 mm
  • Diameter (Ø)

    8 mm
  • Chip flute length

    38 mm
Punktsuðubor hsse 8mm vario 0710 80 8 mm 44 mm 1x
Alternate Text

Punktsuðubor hsse 8mm vario

Vörunúmer: 0710 80

Tæknilegar upplýsingar

  • Length

    44 mm
  • Diameter (Ø)

    8 mm
  • Shaft length (B)

    16 mm
  • Shaft diameter (C)

    7.5 mm